Titan SAN Storage Appliance Series Features The Titan-SAN is a SAN-ready subsystem which combines cost-effective SATA drives in a high availability 4G FC array. IT managers will find it is an easy-to-use and easy to maintain storage solution for their DAS, Fibre Channel SAN and clustered servers or any application requiring dedicated bandwidth.
FC-4G to SATA-II (3Gbps) RAID subsystem
Eight (8) FC-4G host ports w/ onboard bypass
Redundant, active-active RAID controllers
Hardware RAID6 XOR by dedicated ASIC400 chipsets
Intelligent load-balancing; internally & between host links by the EonPath? multi-path software
Proactive parity and media error manual and scheduled scan/repair
High-availability, modular enclosure design
Adaptive writer policy
Up to 2GB cache per controller
Host Interface Drive Interface Model Form Factor FC-4G x 8 SATA-II (3Gbps) IX-SANFC4G16 3U rack-mount
Hardware RAID parity computing
Supports RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, and NRAID
RAID Migration
Configurable stripe size and write policy per array
Multiple Global, Dedicated, & Enclosure-specific hot-spares
Intelligent Drive Handling:
In degraded mode: skips irreparable blocks to continue rebuild
In normal operation: data-block verification and repair
Eight (8) FC-4G host port w/HUB functions
Concurrent I/O commands
Tagged command queuing up to 256
Adaptive cache write policies
Sixteen (16) 3.0Gbps SATA-II (3Gbps) , hot-swappable drive trays
Accommodates 1-inch pitch, 3.5-inch SATA-II (3Gbps) disk drives
S.M.A.R.T. and NCQ supportˇ Automatic bad-sector reassignment
Dedicated bandwidth to each connected drive
Heavy duty 3U enclosure
Dual-redundant RAID controller modules
One (1) 512MB DDR RAM DIMM module (default, supports up to 2GB in size) on each controller
Two (2), hot-swappable, redundant, 530W power supply units
Two (2), redundant, dual-speed cooling modules
Sixteen (16), hot-swappable drive trays
Two (2) forearm handles
LCD keypad panel
Li-Ion, life expectancy & charge level aware battery backup unit (BBU)
COM1 serial port for local access to firmware-embedded utility
COM2 for UPS connection
GUI, Telnet, and SSH system monitoring via Ethernet
Java-based SANWatch software with Snapshot protection
Firmware-embedded manager via RS-232C (audio jack) that is platform independent
Widest range of event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, and MSN
LCD keypad panel to all configuration options
Variable logical drive options per DIMM size
Module status LED indicators:
Two (2) per drive tray
Seven (7) per controller module
One (1) per power supply unit
One (1) per BBU module
Two (2) per cooling module
Module failure alert through I 2 C bus
One (1) Fast Ethernet management port
Two (2) serial COM port (38400, n, 8, 1)
Power Supply Module Two (2) redundant hot-swappable power supplies with PFC
Input Output
Maximum air flow:
High speed: 90 CFM
Low speed: 70 CFM
Operating temperature:
0ē to 40ēC (35ēC w/ battery)
Non-operating temperature:
- 40ē to 60ēC
Relative humidity:
5 to 95%, non-condensing
Altitude:
Operating: sea level to 12,000 ft
Non-operating: sea level to 40,000 ft
Chassis without handles: 445(W) x 130(H) x 488.2(D) mm (17.5 x 5.1 x 19.2 inches)
Chassis with handles: 482.6(W) x 131(H) x 504.3(D) mm (19 x 5.2 x 19.9 inches)
Package: 423(H) x 567(W) x 772(D) mm (16.7 x 22.3 x 30.4 inches) System weight:
Net weight: 28kg
Gross weight: 31kg (without drives)
Don't see what you're looking for? iXsystems has a state of the art manufacturing facility where we can custom build almost anything you can imagine! Please take a moment to fill in the form below to allow an account executive the opportunity to contact you.
